Cylinder Candle Holder base for Taper. Votive. Pillar or LED Candles
Cylinder Glass Shades easily slide over the candle holder base
Assembly Required: Yes
Information
Additional Information:
2x Stem 1:
Height with Glass: 33.5"
Height without Glass: 25"
Number of Poles used: 1
Pole Size: 24"
2x Stem 2:
Height with Glass: 37.5"
Height without Glass: 29"
Number of Poles used: 2
Pole 1: 12”
Pole 2: 16"
Number of Connector: 1
2x Stem 3:
Height with Glass: 41"
Height without Glass: 32.5"
Number of Poles used: 2
Pole Size: 16"x2
Number of Connector: 1
2x Stem 4:
Height with Glass: 45"
Height without Glass: 36.5"
Number of Poles used: 2
Pole 1: 16”
Pole 2: 20"
Number of Connector: 1
2x Stem 5:
Height with Glass: 49"
Height without Glass: 40"
Number of Poles used: 2
Pole Size: 20"x2
Number of Connector: 1
2x Stem 6:
Height with Glass: 53"
Height without Glass: 44.5"
Number of Poles used: 2
Pole 1: 20"
Pole 2: 24"
Number of Connector: 1
4x Stem 7:
Height with Glass: 57"
Height without Glass: 48"
Number of Poles used: 2
Pole Size: 24"x2
Number of Connector: 1
Each Stem Diameter: 0.5"
Each Stem Thickness: 1mm
Each Pole Diameter: 0.5"
Each Pole Thickness: 1mm
Total number of Poles: 30
11.75" x 2
15.75" x 8
19.75" x 8
23.75" x12
16 connectors on the base
12 tiers of poles on the outer edge
1: 1x15.75"
2: 1x19.75"
3: 1 x11.75" + 1x15.75" (27.5" H)
4: 2 x15.75" (31.5"H)
5: 1 x15.75" + 1 x19.75"(35.5"H)
6: 1 x15.75" + 1 x 23.75" (39.5"H)
7: 1 x19.75" +1 x23.75"(43.5"H)
8: 2 x23.75" (47.5"H)
9: 2 x15.75" + 1 x19.75" (51.25" H)
10: 1x11.75" + 1x19.75" + 1x23.75" (55.25"H)
11: 2x19.75" +1 x23.75" (63.25"H)
12: 1x19.75" + 2x23.75" (67.25"H)
4 poles in the middle of the same height
1 x 23.75" each
Joint Connectors: 1"L x 0.5" Diameter x 2mm Thickness
Total number of connectors: 14
Candle Holder Base Height: 1.5"
Candle Holder Base Diameter: 2"
Candle Holder Base Depth: 1"
Comes with 4 pegs
Each Peg Diameter: 0.5"
Note:
Most standard taper candlesticks in both wax and LED will fit centerpiece. Candles are not included.
How to Care:
Prior to first use. glass pieces should be hand washed individually in warm soapy water. rinsed thoroughly and dried with a lint free cloth.
For optimal finish & clarity. clean with a 50/50 solution of vinegar and water. let stand for a few hours then rinse well and dry with a lint free cloth.
Our glass is produced overseas in extremely large quantities for our wholesale customers. due to transit and mass storage. all vases should be cleaned before use to remove any accumulated dust/dirt.
Glass pieces should not be cleaned in a dish washer. Do not use products in microwaves or conventional ovens.
16-Arm Cluster Taper Candle Holder Gold with Clear Glass Shades - Stunning Large Candle Display for Venues 78"
$189.99
16-Arm Cluster Taper Candle Holder Gold with Clear Glass Shades - Stunning Large Candle Display for Venues 78"